|
This is the Futaba 7CHP 7-Channel Computer Helicopter Radio with the R137HP PCM Receiver
and four S3001 Servos.
FEATURES
♦ 10-model memory and 6-character model naming
♦ Same Dial n' Key programming found on Futaba's 9C systems
♦ Basic menu for everyday sport flying, Advanced menu for more
♦ complicated routines
♦ Heli and airplane control layouts in FM or PCM
Heli specific features
♦ Throttle Curve (5 points, Idle up 1 & 2)
♦ Pitch Curve (5 points, Idle up 1 & 2)
♦ Revo Mixing
♦ Gyro
♦ Hovering Throttle
♦ Hovering Pitch
♦ Throttle Hold
♦ Offset
♦ Mode Select feature
♦ Three programmable mixes
♦ Adjustable throttle cut
♦ Fail Safe (in PCM mode only)
♦ VR switch controls proportional 7th channel
♦ EEPROM memory feature retains settings even when transmitter battery is disconnected or
removed
♦ Stick Mode Select Feature-IMPORTANT, For full mode changes, transmitter must be sent
to the Futaba Service Center
♦ Dual Rates on 4 Channels
♦ Triple rates available if using the 3 position switch.
INCLUDES
♦ One Futaba 7CHP 7-Channel Computer Helicopter Radio with transmitter and receiver crystals
♦ Four S3001 Servos
♦ R137HP PCM receiver
♦ 1000mAh NR-4RB Rx battery
♦ NT8S600B TX NICD 600MAH
♦ FBC-19B (4) Wall charger
♦ Servo accessory bag, frequency flag set, neck strap, ON/OFF switch, and instruction manual
REQUIRES
♦ Charging batteries overnight before use
SPECS
♦ Transmitting Frequency : 72MHz band
♦ Modulation : FM/PPM or PCM, switchable
♦ Power Supply : 9.6V NT8S600B NiCd battery
♦ Current Drain : 250mA
|
S3001 Servo Specs
|
|
Torque
|
2.0 Kg-cm at 4.8V 3.0 Kg-cm. at 6V
|
|
Speed
|
0.28 sec/60° @ 4.8V, 0.22 sec/60° @ 6V
|
|
Dimensions(WxLxH)
|
20 x 41 x 35mm
|
|
Weight
|
45.1g
|
|
Gears
|
Plastic
|
|
R-137HP PCM 72MHz Receiver Specs
|
|
Dimensions (WxLxH)
|
33.4 x 50.3 x 18.1 mm
|
|
Weight
|
28.1 g
|
|
Power Requirements
|
4.8V-6V
|
 |
