|
Product information
♦ Our tiny new Airspeed and Altitude MicroSensors have two modes: they work standalone
with no additional equipment required, as well revving up your eLogger, our OSD and OSD
Pro products, and our PowerPanel LCD for full data logging and display. These precision
instruments use pressure differential to measure Airspeed or Altitude.
♦ For standalone mode, simply plug the sensors into a spare receiver channel or small battery
(3V to 16V) and fly your model. Then, when you land, your maximum altitude orairspeed
will display on the built-in 7 segment LED. For example, if you flew to 281 feet, the unit will
display “2 – 8 - 1” repeatedly. No configuration, additional equipment, or computer required!
♦ Or, connect your MicrosensorTM V3 to any of our eLogger products for full logging and
graphing of your flight’s speed or altitude!
♦ New : now you can use the MicrosensorTM V3 sensors with your own
Firmware/Microcontroller! Click here for information on using the MicroSensor with your
own firmware.
Features
♦ Measures airspeed from approx 2 MPH to 350 MPH (3KPH to 563KPH) with resolution of
approx 1 MPH
♦ Power input (Standalone Mode) – 3V to 16V
♦ Circuit Board: Weight 4 grams (0.15 oz), dimensions 28 mm x 16 mm x 10 mm
(1.1” x 0.62” x 0.4”)
♦ Includes Pitot Tube (pictured below) and approx 3' (1 meter) of small diameter silicon tubing
for pitot tube
♦ Precalibrated – no user calibration required
♦ Advanced Temperature Compensation
♦ Selectable Metric or English units
 |
